Atmos Exhaust Systems

Recent News

laser exhaust systems

Exhaust systems for Trotec laser machines

The Atmos exhaust system removes dust and gas created during laser processing and filters odors through its activated carbon filters, ensuring safe and clean operation of your laser equipment. With Atmos, Trotec sets standards in user-friendliness, efficiency and low maintenance costs.

Atmos Pre-filters for high-dust laser engraving and cutting applications

Our laser experts recommend using a pre-filter in cases where laser cutting and engraving of materials produce a large amount of dust, such as wood or stamp rubber applications. The pre-filter is positioned between the laser device and the exhaust system to ensure that coarse particles and dust are separated from the exhaust air before entering the filter of the exhaust system. This increases the service life of your exhaust system significantly and reduces costs for replacement filters.

In cases where particularly heavy or toxic particles are generated, (e.g.when processing acrylic), the pre-filter can be equipped with an additive dosage unit to prolong the service life of the filter.

Atmos exhaust systems: intelligent, economical and clean

Automatic power control: The exhaust rate is adjusted fully automatically depending on the saturation of the filter. Gas and dust are optimally extracted for all applications at any time and a constant flow of air is guaranteed.

Bi-directional control: Atmos exhaust systems communicate with Trotec JobControl®, SpeedMark or DirectMark Software. The software starts automatically when the laser processing begins, and stops as soon as the job is finished. Processing notifications and warnings are displayed in the software.

Convenient filter exchange: Replacement of filter units and activated carbon is easy, clean and convenient. The innovative design allows you to replace the entire filter on your exhaust system in just a few movements.

Digital control panel: The control panel can be accessed easily and conveniently at any time. Its display shows filter saturation, air flow, operating hours and speed range.

Economic operation: The Atmos exhaust systems are equipped with brushless continuous flow turbines. They are completely maintenance-free. In addition, the continuous fresh air cooling ensures maximum operating life.

Energy-saving mode: The Trotec JobControl® software can be used to set the running time of the turbines before and after completing the engraving process. The exhaust power is thus adjusted reliably and saves valuable energy and money by automated switch-on times.

VENT exhaust fan for efficient removal of gas and dust

Vent series fans ensure efficient removal of dust and gases that do not require filtering. If you opt for this exhaust system, please keep in mind that it will not clean dust particles or filter odors. Should a filtering exhaust system be required at a later stage, we offer suitable exhaust systems that include a filter from the Atmos series.

The fans are designed in cast aluminum or steel plate and therefore ensure long-term, robust and failure-free operation.


Atmos laser exhaust systems: intelligent, economical and clean

Automatic power control

The exhaust rate is adjusted fully automatically depending on the saturation of the filter. Gas and dust are optimally extracted for all applications at any time and a constant flow of air is guaranteed.

Bi-directional control

Atmos laser exhaust systems communicate with Trotec JobControl®, SpeedMark or DirectMark Software. The software starts automatically when the laser processing begins, and stops as soon as the job is finished. Processing notifications and warnings are displayed in the software.

Convenient filter exchange

Replacement of filter units and activated carbon is easy, clean and convenient. The innovative design allows you to replace the entire filter on your exhaust system in just a few movements.

Digital control panel

The control panel can be accessed easily and conveniently at any time. Its display shows filter saturation, air flow, operating hours and speed range.

Economic operation

The Atmos laser exhaust systems are equipped with brushless continuous flow turbines. They are completely maintenance-free. In addition, the continuous fresh air cooling ensures maximum operating life.

Energy-saving mode

The Trotec JobControl® software can be used to set the running time of the turbines before and after completing the engraving process. The exhaust power is thus adjusted reliably and saves valuable energy and money by automated switch-on times.

Atmos Product Guide

  Atmos Nano
(highly compact)
Atmos Cube
(ride-on)
Atmos Mono
(stand-alone)
Atmos Mono Plus
(stand-alone)
Atmos Duo Plus
(stand-alone)
Dimensions
D x W x H mm
399 x 328 x 540 605 x 675/955 x 595 700 x 560 x 1050 700 x 560 x 1050 700 x 560 x 1050
Weight 32 kg 114 kg / 129 kg 104 kg 113 kg 115 kg
Energy supply 230V/50/60 Hz 115V/50/60 Hz 230V/50/60 Hz 115V/50/60 Hz 230V/50/60 Hz 115V/50/60 Hz 230V/50/60 Hz 115V/50/60 Hz 230V/50/60 Hz
Motor 1 pc. continuous
flow turbine
1 pc. continuous
flow turbine 
1 pc. continuous
flow turbine
1 pc. continuous
flow turbine
2 pcs. continuous
flow turbines
Performance 200 m³/h 250 m³/h 320 m³/h 320 m³/h 2 x 320 m³/h
Pressure increase 8,500 Pa (230V)
5,800 PA (115V)
8,500 Pa (230V)
5,800 PA (115V)
8,500 Pa (230V)
5,800 PA (115V)
8,500 Pa (230V)
5,800 PA (115V)
8,500 Pa (230V)
Filter type and equipment H13 combination filter and activated carbon Compact filter F9 and activated carbon Compact filter F9 and activated carbon or H13 combination filter and activated carbon Compact filter F9 and activated carbon or H13 combination filter and activated carbon Compact filter F9 and activated carbon or H13 combination filter and activated carbon