|
Languages
Select from many different languages in this drop down list. Languages include English, Spanish, French, Dutch, German, Italian and Japanese.
Start Options
Choose from either Auto Start or Manual Start.
AUTO START causes the laser system to begin engraving as soon as you click the OK button and without having to push the start button on the control panel of the laser system. This option functions only when the laser system’s one file memory mode is activated. Refer to the laser system’s operations manual on how to activate one file memory mode.
MANUAL START is the normal mode of operation of the laser system. The laser system will not start until the entire file enters into the laser system and the operator pushes the start button on the control panel.
Engraving Field
he page size that you enter here matches the page size in your software program exactly and it is up to the operator to enter in the correct settings. Clicking on this button restores the driver back to the default maximum page size that your model can accept.
Measurements Units
Your have a choice of using Metric or Inches.
Orientation
Orientation determines the raster direction of travel and MUST also match your graphics software page orientation EXACTLY. The landscape mode is the normal mode of operation and causes the laser system to raster in the left and right direction. Portrait mode causes the laser system to raster from the front to the back of the laser system. DO NOT choose different orientation settings between your graphics software and the driver otherwise, your graphic may not print in the correct position or may not print at all because it may be inadvertently placed off the printable area of the page.
Rotary Fixture
For use with the optional Rotary Fixture for doing cylindrical objects. When checked, entering the diameter of the glass gives the circumference or area that can be engraved.
|
